ROTOLOAD Applications
ROTOLOAD application configurations are designed to help rotational moulding plants automate powder transfer, weighing, and dispensing at the point of use. Whether the goal is direct-to-mold loading, bucket or tote filling, or controlled mixer feeding, the system is built to improve consistency and material control.
Capabilities of Rotoload™ system
Continuous Loader
Manage ceiling restrictions, overhead cranes, and large shot weights by transferring material to a loader positioned above the mould.
Direct-to-Mold
Deliver powder directly into the mould with retractable dispense hardware and weigh-based control.
Bucket and Tote Filling
Automate recipe-based bucket or tote filling with barcode or RFID identification and a pneumatic lid assembly to help reduce pluming.
Mixing Process
Meter powder above mixers for repeatable blending and controlled material input.
Different Configurations
INTEGRAL
It features our stand-alone, self-contained hopper, complete with an integral vacuum loader and filter system. Must be positioned in relative proximity to the powder source (typically a gaylord or day bin).
Integral Filling rate Up to 20 lbs/min (app. 1,000 lbs/hr) 10 kg/min (app 500 kgs/hr)
CENTRAL
Utilizes a floor-mounted vacuum pump and filter capable of operating up to six (6) separate ROTOLOAD™ systems and provides enough power to feed each unit from a much greater distance, such as your powder room or silo.
Central Filling Rate Up to 80 lbs/min (app. 5,000 lbs/hr) 38 kg/min (app 2,300 kgs/hr)
What you get
- Gravity Discharge/Dump Rates 3” diameter (75 mm) – 2 lbs/sec 4” diameter (100 mm) – 4 lbs/sec 6” diameter (150 mm) – 8 lbs/sec
- Increase part accuracy, Increase part consistency,, Provide DATA, material control and traceability.
- Mounted on three load cells, the ROTOLOAD™ device will fill to its maximum allowable weight capacity or a weight selected by the operator.
